GTAC Observation Log

1. Date : 01/12/2019
2. Observation Sr. No. : 11638
3. Observer : Aditya Chowdhury, Nissim Kanekar, Jayaram Narayanan Chengalur
4. Observer's Email : chowdhury@ncra.tifr.res.in, nkanekar@ncra.tifr.res.in, chengalur@ncra.tifr.res.in
5. Project Name : %latex% The Atomic Hydrogen Content of Galaxies at $z \\\\approx 0.75-1.45$
6. Project Code : 37_063
7. Operator(s) : Pramod, Sachin
8. Command File : /data1/gtac/cmd/37_063/30nov19/obs.py
9. LTA File : /gsbifrdata/30nov/37_063_30nov2019_gwb.lta, /gwbifrdata1/30nov/37_063_30nov2019_gwb.lta
10. LogFlag File :  

ANTENNA SETTINGS :

11. RF Band(MHz) & Solar Attn(dB)- RF1 : 591 MHz ,RF2 : 591 MHz, SA1 : 0 dB, SA2 : 0 dB
12. Ist LO (MHz) & IVth LO (MHz): ILO1 : 540 MHz, ILO2 : 540MHz , IVLO1 : 51 MHz, IVLO2 : 51 MHz 
13. IF Attn(dB) , IF BW(MHz) & IF ALC : IF-CH1 : 4+14 dB, 32 MHz,ON, IF-CH2 : 4+14 dB, 32 MHz,ON

GSB SETTINGS :

14. GSB Host : gsbm1_shivneri
15. GSB Mode : Realtime
16. GSB LTA : 8
17. GSB CTRL : ONLINE
18. GSB Fstop : ON
19. GAIN EQ : ON
20. Stokes : Total_Intensity
21. Beam - 1 : OFF
22. Beam - 2 : OFF
23. ACQ BW : 33.333333 MHz
24. Final BW : 0 MHz; Step # 0
25. Maximum Channels : 256
26. Channel Numbers : 0:255:1
27. LO5 -1  : 149
28. LO5 -2  : 156

29. Frequency Parameters (TPA) : 591 591 540 540 51 51
30. Integration Time : 8.053 Sec
31. No of Antennas Working(Fringing) at the beginning :28

32. Name of Non-Working Antennas (with reason for each) :
C04 : Taken for mechanical work.
C11 : No fringe in GSB only.

33. Note for Backup :

34. Start and End Time of Obs.(IST): 30 Nov 2019 18:00:00 - 01 Dec 2019 00:10:00

35. ONLINE Machine : TGC

36. No of Antennas Working(Fringing) at the end :27

37. RFI Status :

38. Comments (During Observations) :

GPU_MODE    = 0
GPU_LTA     = 4
GPU_ACQ_BW  = 400.0000
GPU_FINAL_BW= 1
GPU_EDGE_FRQ= 0
GPU_CHAN_MAX= 8192
GPU_CHAN_NUM= 0:8191:1
GPU_STOKES  = 2
GPU_CNTRL   = 1
GPU_FSTOP   = 1
GPU_BEAM_1  = 0:1
GPU_BEAM_2  = 0:1
GPU_BEAM_3  = 0:1
GPU_BEAM_4  = 0:1
GPU_BM_INT  = 4
GPU_GAINEQ  = 0
GPU_TPA     = 0
GPU_BITS    = 4
GPU_FILRFI  = 0
GPU_BEAM_S  = 0

17:50 : Started set up.
18:10 : Started command file.
 '/data1/gtac/cmd/37_063/30nov19/obs.py'
19:15 to 21:00  TGC tracking problem for S03.
21:00 : S03 started working in TGC.
00:05 : Closed command file after taking 5 mins of phase and 10 mins of 
flux cal.