GTAC Observation Log 1. Date : 21/12/2019 2. Observation Sr. No. : 11702 3. Observer : Jayanta Roy, Bhaswati Bhattacharyya, Lina Levin, Ben Stappers, Paul Ray 4. Observer's Email : jroy@ncra.tifr.res.in, bhaswati.bhattacharyya78@gmail.com, lina.s.levin@gmail.com, Ben.Stappers@manchester.ac.uk, paul.ray@nrl.navy.mil 5. Project Name : Multi-frequency timing of millisecond pulsars discovered with the GMRT 6. Project Code : 37_053 7. Operator(s) : Navnath, Pramod, Rupsing 8. Command File : /odisk//gtac/cmd//jroy/37_053_21dec.cmd 9. LTA File : /gwbifrdata1/21dec/37_053B_21dec19_band3.lta, /gwbifrdata1/21dec/37_053A_21dec19_band4.lta 10. LogFlag File : /odisk/online1/logflags/37_053B.FLAGS.5, /odisk/online1/logflags/37_053A.FLAGS.5 ANTENNA SETTINGS : 11. RF Band(MHz) & Solar Attn(dB)- RF1 : 591 MHz ,RF2 : 591 MHz, SA1 : 0 dB, SA2 : 0 dB 12. Ist LO (MHz) & IVth LO (MHz): ILO1 : 540 MHz, ILO2 : 540MHz , IVLO1 : 51 MHz, IVLO2 : 51 MHz 13. IF Attn(dB) , IF BW(MHz) & IF ALC : IF-CH1 : 4+14 dB, 32 MHz,OFF, IF-CH2 : 4+14 dB, 32 MHz,OFF GSB SETTINGS : 14. GSB Host : gsbm1_shivneri 15. GSB Mode : Realtime 16. GSB LTA : 8 17. GSB CTRL : ONLINE 18. GSB Fstop : ON 19. GAIN EQ : ON 20. Stokes : Total_Intensity 21. Beam - 1 : OFF 22. Beam - 2 : OFF 23. ACQ BW : 33.333333 MHz 24. Final BW : 0 MHz; Step # 0 25. Maximum Channels : 256 26. Channel Numbers : 0:255:1 27. LO5 -1 : 149 28. LO5 -2 : 156 29. Frequency Parameters (TPA) : 591 591 540 540 51 51 30. Integration Time : 2.0132 Sec 31. No of Antennas Working(Fringing) at the beginning :30 32. Name of Non-Working Antennas (with reason for each) : 33. Note for Backup : 34. Start and End Time of Obs.(IST): 21 Dec 2019 04:00:00 - 21 Dec 2019 09:10:00 35. ONLINE Machine : Shivneri 36. No of Antennas Working(Fringing) at the end :30 37. RFI Status : 38. Comments (During Observations) : 04:00 : Started setup. : Antennas Separated into two Sub array # @325 MHz #sub 2 # C00 C02 C03 C04 C05 C10 C11 W01 E02 S01 ante 10 7 5 1 3 19 12 9 8 17 26 cp 0;defs 2;subar 2 #@610 MHz# sub 4 # C01 C06 C08 C09 C12 C13 C14 W02 W03 W04 W05 W06 E03 E04 E05 E06 S02 S03 S04 S06 ante 20 6 20 24 4 2 11 10 13 14 15 16 25 18 21 22 23 27 28 29 30 cp 0;defs 4;subar 4 ------------GWB Setting--------- GPU_MODE : Realtime GPU_LTA : 4 GPU_ACQ_BW : 200.0000 GPU_FINAL_BW : 200.0000 GPU_EDGE_FRQ : 0 GPU_CHAN_MAX : 4096 GPU_CHAN_NUM : 0:4095:1 GPU_STOKES : Total_Intensity GPU_SIDEBAND : 1 1 GPU_RF2 : 500 500 GPU_DDCLO2 : 0.0000 0.0000 GPU_SB2 : 1 1 GCODE2 : 37_053B GPU_RF4 : 550 550 GPU_DDCLO4 : 0.0000 0.0000 GPU_SB4 : -1 -1 GCODE4 : 37_053A GPU_CNTRL : ONLINE GPU_FSTOP : ON GPU_BEAM_1 : Voltage GPU_BEAM_2 : OFF GPU_BEAM_3 : OFF GPU_BEAM_4 : PA GPU_BM_INT : 4 GPU_GAINEQ : OFF GPU_TPA : From GWB GUI. GPU_BITS : 8 Bits GPU_FILRFI : RFI Filterring OFF GPU_BEAM_S : OFF -------------------------------- 04:15 : Started feed rotation for SUB array 2 at band3. : Started RF,GABLo and ofc parameters settings. 04:30 : Started power eq on 1154-350 at 150 counts. 04:40 : Started phasing for two Sub-array 04:45 : Second iteration of phasing done : final GAC setup is done # GWB GAC configuration is as follows : # BEAM-1:130 :: C00 C02 C03 C04 C05 C10 C11 E02 S01 W01 Total=10 # BEAM-1:175 :: C00 C02 C03 C04 C05 C10 C11 E02 S01 W01 Total=10 # BEAM-2:130 :: Total=0 # BEAM-2:175 :: Total=0 # BEAM-3:130 :: Total=0 # BEAM-3:175 :: Total=0 # BEAM-4:130 :: C01 C06 C08 C09 C12 C13 C14 E03 E04 E05 S02 S03 S04 W02 W03 W04 W05 Total=17 # BEAM-4:175 :: C01 C06 C08 C09 C12 C13 C14 E03 E04 E05 S02 S03 S04 W02 W03 W04 W05 Total=17 ------------------------------------------------------------------------ 04:50 : Started cmd file. /odisk//gtac/cmd//jroy/37_053_21dec.cmd 09:00 : Stopped command file and observation session over.