GTAC Observation Log

1. Date : 07/05/2021
2. Observation Sr. No. : 13059
3. Observer : Jayanta Roy, Paul Ray, Bhaswati Bhattacharyya, Ben Stappers, Jayaram Narayanan Chengalur, Sanjay S. Kudale, Tyrel J. Johnson, Matthew Kerr, Patrick Weltevrede, Paulo Cesar Freire
4. Observer\'s Email : jroy@ncra.tifr.res.in, paul.ray@nrl.navy.mil, bhaswati@ncra.tifr.res.in, Ben.Stappers@manchester.ac.uk, chengalur@ncra.tifr.res.in, ksanjay@gmrt.ncra.tifr.res.in, tyrel.j.johnson@gmail.com, matthew.kerr@gmail.com, Patrick.Weltevrede@manchester.ac.uk, pfreire@mpifr-bonn.mpg.de
5. Project Name : Long-term timing follow-up for the third transitional redback millisecond pulsar J1227-4853
6. Project Code : 40_067
7. Operator(s) : Deepak
8. Command File : /data1/gtac/cmd/jroy/40_067_7may.py
9. LTA File : /gwbifrdata1/07may/40_067_07may2021_gwb.lta
10. LogFlag File : /odisk/online1/logflags/

ANTENNA SETTINGS :

11. RF Band(MHz) & Solar Attn(dB)- RF1 : 591 MHz ,RF2 : 591 MHz, SA1 : 0 dB, SA2 : 0 dB
12. Ist LO (MHz) & IVth LO (MHz): ILO1 : 540 MHz, ILO2 : 540MHz , IVLO1 : 51 MHz, IVLO2 : 51 MHz 
13. IF Attn(dB) , IF BW(MHz) & IF ALC : IF-CH1 : 4+14 dB, 32 MHz,ON, IF-CH2 : 4+14 dB, 32 MHz,ON

GSB SETTINGS :

14. GSB Host : gsbm1_shivneri
15. GSB Mode : Realtime
16. GSB LTA : 8
17. GSB CTRL : ONLINE/TGC
18. GSB Fstop : ON
19. GAIN EQ : ON
20. Stokes : Total_Intensity
21. Beam - 1 : OFF
22. Beam - 2 : OFF
23. ACQ BW : 33.333333 MHz
24. Final BW : 0 MHz; Step # 0
25. Maximum Channels : 256
26. Channel Numbers : 0:255:1
27. LO5 -1  : 149
28. LO5 -2  : 156

29. Frequency Parameters (TPA) : 591 591 540 540 51 51
30. Integration Time : 16.1061 Sec
31. No of Antennas Working(Fringing) at the beginning :28

32. Name of Non-Working Antennas (with reason for each) :
C03 : Mechanical Work.
W04 : Mechanical work

33. Note for Backup :

34. Start and End Time of Obs.(IST): 07 May 2021 20:00:00 - 07 May 2021 21:40:00

35. ONLINE Machine : TGC

36. No of Antennas Working(Fringing) at the end :28

37. RFI Status :

38. Comments (During Observations) :

GPU_LTA     = 8		/* LTA values can be : 1,2,4,8,16,32 etc.  */
GPU_ACQ_BW  = 200.0000		/* 100 MHz, 200 MHz, and 400 MHz etc.  */
GPU_FINAL_BW= 1		/* 1,2,4,8,16,32,64 As divisor of ACQ_BW, Val = 200 */
GPU_EDGE_FRQ= 0.000000		/* Freq Entry in steps of Nyq, Val = 0 */
GPU_CHAN_MAX= 4096		/* 1024, 2048, 4096, 8192 and 16384.  */
GPU_CHAN_NUM= 0:4095:1		/* any range i:j:1;for i,j<chan_max   */

======================================
GAC conf
# GWB GAC configuration is as follows : 
# BEAM-1:130 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C11 C12 C13 C14 E02 E03 E04 S01 S02 S03 S04 W01 W02 W03 Total=23
# BEAM-1:175 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C11 C12 C13 C14 E02 E03 E04 S01 S02 S03 S04 W01 W02 W03 Total=23
# BEAM-2:130 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C11 C12 C13 C14 E02 E03 E04 S01 S02 S03 S04 W01 W02 W03 Total=23
# BEAM-2:175 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C11 C12 C13 C14 E02 E03 E04 S01 S02 S03 S04 W01 W02 W03 Total=23
# BEAM-3:130 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C11 C12 C13 C14 E02 E03 E04 S01 S02 S03 S04 W01 W02 W03 Total=23
# BEAM-3:175 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C11 C12 C13 C14 E02 E03 E04 S01 S02 S03 S04 W01 W02 W03 Total=23
# BEAM-4:130 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C11 C12 C13 C14 E02 E03 E04 S01 S02 S03 S04 W01 W02 W03 Total=23
# BEAM-4:175 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C11 C12 C13 C14 E02 E03 E04 S01 S02 S03 S04 W01 W02 W03 Total=23

-------------------------------------------------
20:00 : Started setup.
20:15 : Started command file
21:45 : Observation stopped.