GTAC Observation Log

1. Date : 14/06/2021
2. Observation Sr. No. : 13197
3. Observer : Nissim Kanekar, Jayanta Roy, Aditya Chowdhury
4. Observer\'s Email : nkanekar@ncra.tifr.res.in, jroy@ncra.tifr.res.in, chowdhury@ncra.tifr.res.in
5. Project Name : Localizing a nearby Fast Radio Burst with the uGMRT
6. Project Code : ddtC165
7. Operator(s) : Nilesh, Shilpa
8. Command File : /data1/gtac/cmd/jroy/ddtc165_14jun.cal.py,, /data1/gtac/cmd/jroy/frb20200120e_14jun.py
9. LTA File : /gwbifrdata2/14jun/ddtc165_14jun2021_gwb.lta
10. LogFlag File :     

ANTENNA SETTINGS :

11. RF Band(MHz) & Solar Attn(dB)- RF1 : 602 MHz ,RF2 : 602 MHz, SA1 : 0 dB, SA2 : 0 dB
12. Ist LO (MHz) & IVth LO (MHz): ILO1 : 540 MHz, ILO2 : 540MHz , IVLO1 : 62 MHz, IVLO2 : 62 MHz 
13. IF Attn(dB) , IF BW(MHz) & IF ALC : IF-CH1 : 24+4 dB, 16 MHz,OFF, IF-CH2 : 24+4 dB, 16 MHz,OFF

GSB SETTINGS :

14. GSB Host : gsbm1_shivneri
15. GSB Mode : Realtime
16. GSB LTA : 8
17. GSB CTRL : TGC
18. GSB Fstop : ON
19. GAIN EQ : OFF
20. Stokes : Total_Intensity
21. Beam - 1 : OFF
22. Beam - 2 : OFF
23. ACQ BW : 16.666666 MHz
24. Final BW : 0 MHz; Step # 0
25. Maximum Channels : 256
26. Channel Numbers : 0:255:1
27. LO5 -1  : 138
28. LO5 -2  : 167

29. Frequency Parameters (TPA) : 602 602 540 540 62 62
30. Integration Time : 2.0132 Sec
31. No of Antennas Working(Fringing) at the beginning :28

32. Name of Non-Working Antennas (with reason for each) :
C03 : Mechanical Work.
W06 : Painting.

33. Note for Backup :

34. Start and End Time of Obs.(IST): 14 Jun 2021 12:45:00 - 14 Jun 2021 15:00:00

35. ONLINE Machine : TGC

36. No of Antennas Working(Fringing) at the end :28

37. RFI Status :

38. Comments (During Observations) :
Pulsar Data Files on :-
GWBH7 : /data5/gpuuser/DDTC165_data5_14jun2021/*
GWBH8 : /data6/gpuuser/DDTC165_14jun2021_data6/*
GWBH9 : /data6/gpuuser/DDTC165_14jun2021_data6/*
------------GWB Setting---------------------------------------------------
GPU_MODE  	: Realtime
GPU_LTA  	: 4
GPU_ACQ_BW  	: 200.0000
GPU_FINAL_BW  	: 200
GPU_EDGE_FRQ  	: 0
GPU_CHAN_MAX  	: 4096
GPU_CHAN_NUM  	: 0:4095:1
GPU_STOKES  	: Total_Intensity
GPU_SIDEBAND  	: 1 1
GPU_RF4  	: 550  550
GPU_DDCLO4  	: 0.0000  0.0000
GPU_SB4  	: 1 1
GCODE4  	: DDTC165
GPU_CNTRL  	: TGC
GPU_FSTOP  	: ON
GPU_BEAM_1  	: VOLTAGE
GPU_BEAM_2  	: IA
GPU_BEAM_3  	: PA
GPU_BEAM_4  	: OFF
GPU_BM_INT  	: 16
GPU_GAINEQ  	: ON
GPU_TPA  	: From online/TGC tpa
GPU_BITS  	: 8 Bits
GPU_FILRFI  	: RFI Filterring OFF
GPU_BEAM_S  	: OFF
GPU_PFB  	: OFF
GPU_PFB_TAPS  	: 4
GPU_BEAM_BIT  	: 16
GPU_VLT_BIT  	: 8
GPU_ENV  	: RELEASED
--------------------------------------------------------------------------
# GWB GAC configuration is as follows : 
# BEAM-1:130 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C11 C12 C13 C14 E02 E03 E04 S01 S02 S03 S04 W01 W02 W03 W04 Total=24
# BEAM-1:175 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C11 C12 C13 C14 E02 E03 E04 S01 S02 S03 S04 W01 W02 W03 W04 Total=24
# BEAM-2:130 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C11 C12 C13 C14 E02 E03 E04 S01 S02 S03 S04 W01 W02 W03 W04 Total=24
# BEAM-2:175 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C11 C12 C13 C14 E02 E03 E04 S01 S02 S03 S04 W01 W02 W03 W04 Total=24
# BEAM-3:130 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C11 C12 C13 C14 E02 E03 E04 S01 S02 S03 S04 W01 W02 W03 W04 Total=24
# BEAM-3:175 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C11 C12 C13 C14 E02 E03 E04 S01 S02 S03 S04 W01 W02 W03 W04 Total=24
--------------------------------------------------------------------------
12:45 : Started settings for GSB.
13:04 : Power equalized on 3C48 @ 300 counts for GSB.
13:05 : Halted GSB and started raw voltage recording for GSB.
--------------------------------------------------------------------------
13:05 : Started settings for GWB.
13:20 : Power equalized on 3C48 @ 150 counts for GWB.
13:25 : Phasing done on 3C48.

13:28 : \'/data1/gtac/cmd/jroy/ddtc165_14jun.cal.py\' command file started.
13:36 : Stopped command file.

13:37 : \'/data1/gtac/cmd/jroy/frb20200120e_14jun.py\' command file started.
15:00 : Stopped command file and observing session over.