GTAC Observation Log 1. Date : 21/03/2022 2. Observation Sr. No. : 14046 3. Observer : Shyam Sunder, Jayanta Roy, Bhaswati Bhattacharyya, Shubham Singh 4. Observer\'s Email : ssunder@ncra.tifr.res.in, jroy@ncra.tifr.res.in, bhaswati@ncra.tifr.res.in, ssingh@ncra.tifr.res.in 5. Project Name : Localisation of pulsars discovered in the GHRSS survey 6. Project Code : 41_095 7. Operator(s) : Rupsing, Sachin, Shilpa 8. Command File : /odisk/gtac/cmd/obs.py 9. LTA File : /gwbifrdata/21mar/41_095_21mar2022_gwb.lta 10. LogFlag File : ANTENNA SETTINGS : 11. RF Band(MHz) & Solar Attn(dB)- RF1 : 306 MHz ,RF2 : 306 MHz, SA1 : 0 dB, SA2 : 0 dB 12. Ist LO (MHz) & IVth LO (MHz): ILO1 : 255 MHz, ILO2 : 255MHz , IVLO1 : 51 MHz, IVLO2 : 51 MHz 13. IF Attn(dB) , IF BW(MHz) & IF ALC : IF-CH1 : 4+14 dB, 32 MHz,ON, IF-CH2 : 4+14 dB, 32 MHz,ON GSB SETTINGS : 14. GSB Host : gsbm1_shivneri 15. GSB Mode : Realtime 16. GSB LTA : 8 17. GSB CTRL : ONLINE/TGC 18. GSB Fstop : ON 19. GAIN EQ : OFF 20. Stokes : Total_Intensity 21. Beam - 1 : OFF 22. Beam - 2 : OFF 23. ACQ BW : 33.333333 MHz 24. Final BW : 0 MHz; Step # 0 25. Maximum Channels : 256 26. Channel Numbers : 0:255:1 27. LO5 -1 : 149 28. LO5 -2 : 156 29. Frequency Parameters (TPA) : 306 306 255 255 51 51 30. Integration Time : 2.0132 Sec 31. No of Antennas Working(Fringing) at the beginning :28 32. Name of Non-Working Antennas (with reason for each) : C03 : Mechanical Work. E05 : LMC problem. 33. Note for Backup : 34. Start and End Time of Obs.(IST): 21 Mar 2022 05:00:00 - 21 Mar 2022 07:00:00 35. ONLINE Machine : TGC 36. No of Antennas Working(Fringing) at the end :28 37. RFI Status :/gwbifrdata/21mar/41_095_21mar2022_gwb.lta 38. Comments (During Observations) : ------------GWB Setting--------- GPU_MODE : Realtime GPU_LTA : 4 GPU_ACQ_BW : 200.0000 GPU_FINAL_BW : 200 GPU_EDGE_FRQ : 0 GPU_CHAN_MAX : 4096 GPU_CHAN_NUM : 0:4095:1 GPU_STOKES : Total_Intensity GPU_SIDEBAND : 1 1 GPU_RF4 : 500 500 GPU_DDCLO4 : 0.0000 0.0000 GPU_SB4 : 1 1 GCODE4 : 41_095 GPU_CNTRL : ONLINE/TGC GPU_FSTOP : ON GPU_BEAM_1 : IA GPU_BEAM_2 : PA GPU_BEAM_3 : OFF GPU_BEAM_4 : OFF GPU_BM_INT : 16 GPU_GAINEQ : ON GPU_TPA : From online/TGC tpa GPU_BITS : 8 Bits GPU_FILRFI : Voltage Detection GPU_BEAM_S : OFF GPU_PFB : OFF GPU_PFB_TAPS : 4 GPU_BEAM_BIT : 16 GPU_VLT_BIT : 8 GPU_WALSH : OFF GPU_ENV : RELEASED -------------------------------- # GWB GAC configuration is as follows : # BEAM-1:130 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C11 C12 C13 C14 E02 E03 S02 S03 W02 Total=18 # BEAM-1:175 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C11 C12 C13 C14 E02 E03 S02 S03 W02 Total=18 # BEAM-2:130 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C11 C12 C13 C14 E02 E03 S02 S03 W02 Total=18 # BEAM-2:175 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C11 C12 C13 C14 E02 E03 S02 S03 W02 Total=18 ----------------------------------------------------------------------- Since there was power failure before observation slot, S01,W01,W03 were not tracking after power failure, removed from GAC. 04:56:22 : Started scan on 1830-360 for ~ 1.11848 min. 05:12:40 : Started scan on J1820-0427 for ~ 6.12927 min. 05:21:45 : Started scan on J1941-3006 for ~ 05:30 : S01,W01,W03 started tracking but there was not phasing before pulsar so kept out of GAC. ----------------------------------------------------------------------- 07:22 : Stopped command file and observation closed.