GTAC Observation Log

1. Date : 24/09/2022
2. Observation Sr. No. : 14630
3. Observer : Maura Pilia, Matteo Trudu, Visweshwar Ram Marthi, Andrea Possenti, Luciano Nicastro, Cristiano Guidorzi, Luca Zampieri, Filippo Ambrosino, Francesca Panessa, Vishal R Gajjar
4. Observer\'s Email : maura.pilia@inaf.it, matteo.trudu@inaf.it, vrmarthi@ncra.tifr.res.in, andrea.possenti@inaf.it, luciano.nicastro@inaf.it, guidorzi@fe.infn.it, luca.zampieri@inaf.it, filippo.ambrosino@inaf.it, francesca.panessa@inaf.it, vishalg@berkeley.edu
5. Project Name : A multi-wavelength campaign to tackle the progenitor of FRB~20180916B
6. Project Code : 42_106
7. Operator(s) : Deepak, Shilpa, Surender
8. Command File : /data1/gtac/cmd/42_106/42_106_24Sep2022_0100_cmd.py
9. LTA File : /gwbifrdata/24sep/42_106_24sep2022_gwb.lta.3, /gwbifrdata/24sep/42_106_24sep2022_gwb.lta.2, /gwbifrdata/24sep/42_106_24sep2022_gwb.lta.1, /gwbifrdata/24sep/42_106_24sep2022_gwb.lta
10. LogFlag File :     

ANTENNA SETTINGS :

11. RF Band(MHz) & Solar Attn(dB)- RF1 : 306 MHz ,RF2 : 306 MHz, SA1 : 0 dB, SA2 : 0 dB
12. Ist LO (MHz) & IVth LO (MHz): ILO1 : 255 MHz, ILO2 : 255MHz , IVLO1 : 51 MHz, IVLO2 : 51 MHz 
13. IF Attn(dB) , IF BW(MHz) & IF ALC : IF-CH1 : 4+14 dB, 32 MHz,ON, IF-CH2 : 4+14 dB, 32 MHz,ON

GSB SETTINGS :

14. GSB Host : gsbm1_shivneri
15. GSB Mode : Realtime
16. GSB LTA : 8
17. GSB CTRL : TGC
18. GSB Fstop : ON
19. GAIN EQ : ON
20. Stokes : Total_Intensity
21. Beam - 1 : OFF
22. Beam - 2 : OFF
23. ACQ BW : 33.333333 MHz
24. Final BW : 0 MHz; Step # 0
25. Maximum Channels : 256
26. Channel Numbers : 0:255:1
27. LO5 -1  : 149
28. LO5 -2  : 156

29. Frequency Parameters (TPA) : 306 306 255 255 51 51
30. Integration Time : 16.1061 Sec
31. No of Antennas Working(Fringing) at the beginning :27

32. Name of Non-Working Antennas (with reason for each) :
C03 : Mechanical Work.
C11 : No Fringe.
W01 : No fringe.
33. Note for Backup :

34. Start and End Time of Obs.(IST): 24 Sep 2022 01:00:00 - 24 Sep 2022 08:40:00

35. ONLINE Machine : TGC

36. No of Antennas Working(Fringing) at the end :27

37. RFI Status :

38. Comments (During Observations) :
Pulsar data : gwbh10 : /data7/gpuuser/NA_data7_24sep2022/*
Pulsar data : gwbh10 : /data7/gpuuser/42_106_data7_24sep2022
------------GWB Setting---------------------------------------------------
GPU_MODE  	: Realtime
GPU_LTA  	: 4
GPU_ACQ_BW  	: 200.0000
GPU_FINAL_BW  	: 200
GPU_EDGE_FRQ  	: 0
GPU_CHAN_MAX  	: 2048
GPU_CHAN_NUM  	: 0:2047:1
GPU_STOKES  	: Full_Stokes
GPU_SIDEBAND  	: 1 1
GPU_RF4  	: 500 500
GPU_DDCLO4  	: 0.0000  0.0000
GPU_SB4  	: 1 1
GCODE4  	: 42_106
GPU_CNTRL  	: TGC
GPU_FSTOP  	: ON
GPU_BEAM_1  	: PA
GPU_BEAM_2  	: OFF
GPU_BEAM_3  	: OFF
GPU_BEAM_4  	: OFF
GPU_BM_INT  	: 8
GPU_GAINEQ  	: ON
GPU_TPA  	: From online/TGC tpa
GPU_BITS  	: 8 Bits
GPU_FILRFI  	: Voltage Detection
GPU_BEAM_S  	: OFF
GPU_PFB  	: OFF
GPU_PFB_TAPS  	: 4
GPU_BEAM_BIT  	: 16
GPU_VLT_BIT  	: 8
GPU_WALSH  	: OFF
GPU_ENV  	: RELEASED
--------------------------------------------------------------------------
GWB GAC configuration is as follows : 
# BEAM-4:130 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C12 C13 C14 S01 Total=13
# BEAM-4:175 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C12 C13 C14 S01 Total=13
--------------------------------------------------------------------------
01:01 : Started set-up.
01:19 : Started command file.
01:19 -02:02 : Beam recording problem due to beam int value was 8, after changed beam integration 16 , beam recording problem resolved.
--------------------------------------------------------------------------
02:02 : Started set-up with beam int 16.
02:13 : Started command file.
           /data1/gtac/cmd/42_106/42_106_24Sep2022_0100_cmd.py

08:00 - 08:40 : Extend observation due to loss at the beginning.
08:40 : Stopped scan and observing session over.
--------------------------------------------------------------------------