GTAC Observation Log 1. Date : 01/02/2009 2. Observation Sr. No. : 4172 3. Observer : Philip Lah, Sambit Roychowdhury 4. Observer's Email : plah@mso.anu.edu.au,sambit@ncra.tifr.res.in 5. Project Name : Gas in galaxies in the distant past. 6. Project Code : 15PLA01 7. Operator(s) : Nilesh, 8. Command File : /odisk/gtac/cmd/15pla01/a370.cmd 9. LTA File : /rawdata/1feb/15pla01_01feb2009.lta, /rawdata/1feb/15pla01_01feb2009_diffstop.lta, /rawdata1/1feb/15pla01_01feb2009.ltb, /rawdata1/1feb/15pla01_01feb2009_diffstop.ltb 10. LogFlag File : /btemp2/logflags/15PLA01.FLAGS.9 ANTENNA SETTINGS : 11. RF Freq(MHz) & Solar Attn(dB)- RF1 : 1040 MHz ,RF2 : 1040 MHz, SA1 : 0 dB, SA2 : 0 dB 12. Ist LO (MHz) & IVth LO (MHz) : ILO1 : 1110 MHz, ILO2 : 1110 MHz, IVLO1 : 70 MHz, IVLO2 : 70 MHz 13. IF Attn(dB) , IF BW(MHz) & IF ALC : IF-CH1 : 4+12 dB, 32 MHz,ON, IF-CH2 : 4+12 dB, 32 MHz,ON 14. BB BW(KHz) & BB ALC : 16000 KHz, ON CORRELATOR SETTINGS : 16. Channels : 0:127:1 17. Frequency Parameters (TPA) : 1040 1040 1110 1110 70 70 18. Integration Time : 128 LTA ~ 16.908 Sec. 19. No of Antennas Working(Fringing) :27 20. Name of Non-Working Antennas (with reason for each) : C14 : For painting. S03 : No fringe at LSB. W04 : Low fringe. 21. Note for Backup : -- 22. Start and End Time of Obs.(IST): 15:15 - 23:45 23. ONLINE Machine : Bhaskar 24. Correlator Mode : IndianPolar 25. Comments (During Observations) : --------------------------------------------------------- NOTE FOR THE USER : "The online fringe stopping algorithm was found to be in error by about 2s after 1Jan2009. This differential fringe rate was applied using the program diffstop. The fringe rate was corrected for an error of +2.0s, and the timestamps were also updated by the same amount." ----------------------------------------------------------------------------- 15:15 : Started settings. 15:33 : Started scan on 3C48. 15:49 : Stopped scan. 16:00 : Started command file. 17:26 : W-arm power failure. 18:10 : W-arm power resume. 18:30 : C14 released for observation. 18:43 : W-arm and C14 started working. 23:20 : Command file stopped. 23:23 : Started scan on 3C147 for 15mins. 23:40 : Observation stopped.