GTAC Observation Log 1. Date : 03/02/2009 2. Observation Sr. No. : 4178 3. Observer : Philip Lah, Sambit Roychowdhury 4. Observer's Email : plah@mso.anu.edu.au,sambit@ncra.tifr.res.in 5. Project Name : Gas in galaxies in the distant past. 6. Project Code : 15PLA01 7. Operator(s) : Jayprakash, Manisha, Nilesh, Rupsingh, Sachin, Santaji, Shilpa 8. Command File : /odisk/gtac/cmd/15pla01/vvds14.cmd, /odisk/gtac/cmd/15pla01/cl0024.cmd, /odisk/gtac/cmd/15pla01/a370.cmd 9. LTA File : /rawdata/3feb/15pla01_03feb2009.lta, /rawdata1/3feb/15pla01_03feb2009.ltb, 10. LogFlag File : /btemp2/logflags/15PLA01.FLAGS.11 ANTENNA SETTINGS : 11. RF Freq(MHz) & Solar Attn(dB)- RF1 : 1076 MHz ,RF2 : 1076 MHz, SA1 : 0 dB, SA2 : 0 dB 12. Ist LO (MHz) & IVth LO (MHz) : ILO1 : 1145 MHz, ILO2 : 1145 MHz, IVLO1 : 69 MHz, IVLO2 : 69 MHz 13. IF Attn(dB) , IF BW(MHz) & IF ALC : IF-CH1 : 4+12 dB, 32 MHz,ON, IF-CH2 : 4+12 dB, 32 MHz,ON 14. BB BW(KHz) & BB ALC : 16000 KHz, ON CORRELATOR SETTINGS : 16. Channels : 0:255:1 17. Frequency Parameters (TPA) : 1076 1076 1145 1145 69 69 18. Integration Time : 128 LTA ~ 16.908 Sec. 19. No of Antennas Working(Fringing) :29 20. Name of Non-Working Antennas (with reason for each) : W01 : For painting. 21. Note for Backup : -- 22. Start and End Time of Obs.(IST): 07:39 - 23:20 23. ONLINE Machine : Bhaskar 24. Correlator Mode : IndianPolar 25. Comments (During Observations) : --------------------------------------------------------- NOTE FOR THE USER : "The online fringe stopping algorithm was found to be in error by about 2s after 1Jan2009. This differential fringe rate was applied using the program diffstop. The fringe rate was corrected for an error of +2.0s, and the timestamps were also updated by the same amount." ----------------------------------------------------------------------------- 07:39 : Started setting. 07:59 : Started scan on 3C286. 08:10 : Stopped scan. 08:12 : '/odisk/gtac/cmd/15pla01/vvds14.cmd' command file started. 09:20 : C14 taken for painting. 10:24 : Stopped command file. 10:30 : Started scan on 2202+422. 10:40 : Stopped scan. Changed the settings. tpa 1024 1024 1095 1095 71 71. 10:47 : Started scan on 2202+422. 10:52 : C00 got abc reset. 10:57 : Stopped scan. 11:11 : '/odisk/gtac/cmd/15pla01/cl0024.cmd' command file started. 12:12 : C14 released for observation. 12:17 : MSEB power failure. Stopped command file. 12:31 : Restarted command file. 12:55 : Found that only one antenna has set, stoppd scan. 13:07 : Done all the settings for all antennas. (Scan no.12 and 13 bad) 13:09 : Started scan on 0022+002. 13:17 : Stopped scan. 13:20 : Started scan on 3C48. 13:25 : W06 got abc reset. 13:31 : Stopped scan. Changed the settings. tpa 1040 1040 1110 1110 70 70 13:38 : Started scan on 3C48. 13:49 : Stopped scan. 13:53 : '/odisk/gtac/cmd/15pla01/a370.cmd' command file started. 14:30 : C14 taken for painting. 14:30 : W01 released for observation. 15:24 : MSEDCL Power failed. 15:30 : Power resumed. 15:40 : Started command file. 23:00 : stopped the command file. 23:03 : scan started on 3c147. 23:20 : observation session over.