GTAC Observation Log

1. Date : 03/10/2015
2. Observation Sr. No. : 8107
3. Observer : George Heald, Peter Kamphuis, Gyula I.G. Józsa, Paolo Serra, p a Duc, Gianfranco Gentile, Tom Oosterloo, Eva Juette, Maria Patterson, David A Thilker, Erwin deBlok
4. Observer's Email : heald@astron.nl, peter.kamphuis@csiro.au, jozsa@astron.nl, serra@astron.nl, paduc@cea.fr, gianfranco.gentile@ugent.be, oosterloo@astron.nl, eva.juette@astro.rub.de, mtpatter@nmsu.edu, dthilker@pha.jhu.edu, blok@astron.nl
5. Project Name : %latex%What is the dark \\textsc{H\\,i} companion to NGC 4274?
6. Project Code : 25_061
7. Operator(s) : Deepak, Navnath, Sachin
8. Command File : /odisk/gtac/cmd/chengalu/hi1220.cmd
9. LTA File : /gsbifrdata1/03oct/25_061_03oct2015.lta
10. LogFlag File : /odisk/online1/logflags/25_061.FLAGS.6

ANTENNA SETTINGS :

11. RF Band(MHz) & Solar Attn(dB)- RF1 : 1405 MHz ,RF2 : 1405 MHz, SA1 : 0 dB, SA2 : 0 dB
12. Ist LO (MHz) & IVth LO (MHz): ILO1 : 1345 MHz, ILO2 : 1345MHz , IVLO1 : 60 MHz, IVLO2 : 60 MHz 
13. IF Attn(dB) , IF BW(MHz) & IF ALC : IF-CH1 : 4+14 dB, 32 MHz,ON, IF-CH2 : 4+14 dB, 32 MHz,ON

GSB SETTINGS :

14. GSB Host : gsbm1
15. GSB Mode : Realtime
16. GSB LTA : 8
17. GSB CTRL : ONLINE
18. GSB Fstop : ON
19. GAIN EQ : ON
20. Stokes : Total_Intensity
21. Beam - 1 : OFF
22. Beam - 2 : OFF
23. ACQ BW : 16.666666 MHz
24. Final BW : 4 MHz; Step # 2
25. Maximum Channels : 512
26. Channel Numbers : 0:511:1
27. LO5 -1  : 140
28. LO5 -2  : 165

29. Frequency Parameters (TPA) : 1405 1405 1345 1345 60 60
30. Integration Time : 16.1061 Sec
31. No of Antennas Working(Fringing) at the beginning :25

32. Name of Non-Working Antennas (with reason for each) :
C01 : Servo work
C12 : Servo problem.
E03 : Servo work
W04 : MCM 5 timed out.
W02 : Servo problem
33. Note for Backup :

34. Start and End Time of Obs.(IST): 03 Oct 2015 06:00:00 - 03 Oct 2015 18:00:00

35. ONLINE Machine : Shivneri

36. No of Antennas Working(Fringing) at the end :28

37. Comments (During Observations) :
06:14 : Started scan on 3C147 for 15mins.
06:51 : Started command file
07:05 : W02 started working.
10:01 : C12 started working
10:05 : C03 released for maintenance.
10:15 : E03 started working.
10:23 : C04 released for painting.
10:40 : C06 released for painting.
12:36 : C01 started working.
14:25 : Electrical power failure.
15:05 : C06 released for observation.
16:02 : E02: ABC time out
16:04 : C04 released for observation 
16:37 : E03 : ABC Time out.
16:55 : electrical power resumed.
17:10 : Restarted cmd file.
17:27 : cmd file stopped, src below horizion.
17:41 : Started scan on 3C286.
18:00 : Observation session over.