GTAC Observation Log 1. Date : 29/07/2017 2. Observation Sr. No. : 9615 3. Observer : Nirupam Roy, Nissim Kanekar, Jayaram Narayanan Chengalur, Narendranath Patra 4. Observer's Email : roy.nirupam@gmail.com, nkanekar@ncra.tifr.res.in, chengalur@ncra.tifr.res.in, narendra@ncra.tifr.res.in 5. Project Name : The Temperature of the Warm Neutral Medium in the Milky Way 6. Project Code : 32_056 7. Operator(s) : Pramod, Surender 8. Command File : /odisk/gtac/cmd 9. LTA File : /gsbifrdata/29jul/32_056_29jul2017.lta, /gwbifrdata2/29jul/32_056_29jul2017_gwb.lta 10. LogFlag File : /odisk/online1/logflags/32_056.FLAGS.3 ANTENNA SETTINGS : 11. RF Band(MHz) & Solar Attn(dB)- RF1 : 1411 MHz ,RF2 : 1411 MHz, SA1 : 0 dB, SA2 : 0 dB 12. Ist LO (MHz) & IVth LO (MHz): ILO1 : 1350 MHz, ILO2 : 1350MHz , IVLO1 : 61 MHz, IVLO2 : 61 MHz 13. IF Attn(dB) , IF BW(MHz) & IF ALC : IF-CH1 : 4+14 dB, 32 MHz,ON, IF-CH2 : 4+14 dB, 32 MHz,ON GSB SETTINGS : 14. GSB Host : gsbm1_shivneri 15. GSB Mode : Realtime 16. GSB LTA : 8 17. GSB CTRL : ONLINE 18. GSB Fstop : ON 19. GAIN EQ : ON 20. Stokes : Total_Intensity 21. Beam - 1 : OFF 22. Beam - 2 : OFF 23. ACQ BW : 16.666666 MHz 24. Final BW : 2 MHz; Step # 4 25. Maximum Channels : 512 26. Channel Numbers : 0:511:1 27. LO5 -1 : 139 28. LO5 -2 : 166 29. Frequency Parameters (TPA) : 1411 1411 1350 1350 61 61 30. Integration Time : 16.1061 Sec 31. No of Antennas Working(Fringing) at the beginning :27 32. Name of Non-Working Antennas (with reason for each) : C03 : : Servo Problem. C06 : : Servo Problem. W03 : : Strong RFI. C02 :-130,C09-175,C10-130,E03,E04-175,S01-175 : Low self power @GWB o/p.not getting power equalized. 33. Note for Backup : 34. Start and End Time of Obs.(IST): 29 Jul 2017 17:00:00 - 29 Jul 2017 22:10:00 35. ONLINE Machine : Lenyadri 36. No of Antennas Working(Fringing) at the end :29 37. Comments (During Observations) : 16:55 : Started setup. 17:02 : Electrical power glitch to all antennas. 17:10 : Restarted setup. 17:25 : Started command file. 18:38 : Electrical power glitch to all antennas. 19:00 : Restarted command file. 18:38 : S02 Servo Problem. 19:07 : C03 & C06 Released for observation. 19:38 : S02 released for observation. 21:45 : Stopped command file due to source below horizon. 21:48 : Started scan on 3C286. 22:10 : Stopped command file and observing session over.